Fabrication & Analysis of Power produced by Portable Wind-Mill on the basis of its Tail Length

Rajendra Sharma; Sandeep Kumawat

Volume : V, Issue : V, May - 2016

Fabrication & Analysis of Power produced by Portable Wind-Mill on the basis of its Tail Length

Rajendra Sharma, Sandeep Kumawat

Abstract :

This work provides the analysis of power/r.p.m produced by a portable wind mill for different tail-lengths with an objective to derive a tail-length for which the power/r.p.m produced by a wind mill under similar air flow conditions is optimum.This is achieved by analysis and investigating the power/r.p.m of a portable wind mill at different elevation of a same site (College Campus).For this purpose the upper part of the wind mill is mounted with a caliberated tail with a provision of changing the length of the tail and r.p.m were recorded by the r.p.m meter.The recorded readings were analysed then graphs are plotted & the points having optimum power are shown.This work will help the desiger to get an idea about the geometry of the tail length of a Wind-mil to obtain optimum power.