Volume : IV, Issue : XII, December - 2015

Identification and Treatment of Waste Water Using pH Monitoring in Internet of Things Environment

Merline. G

Abstract :

The Internet of Things (IoT) is the interconnection of uniquely identifiable embedded computing devices within the existing Internet infrastructure. Waste water is identified using micro controller, gas sensor, viscosity sensor and pH sensor and treated using chlorine and pumping motor. pH sensor finds the level of contamination of water. If pH of the sample water = pH level of water, then pumping motor starts. If pH of sample > pH level of water then chlorine motor starts and pumping motor stops. And when pH level again comes equal to the pH level of water, then again pumping motor starts and chlorine motor stops. If any error in the above sequence is identified it will be indicated by buzzer and whole process can be viewed in PC via WSN. LCD displays pH measurements. These information will be automatically updated through the server. As these devices are interconnected through internet, this information can be accessed from any place.

Keywords :

Article: Download PDF   DOI : 10.36106/ijsr  

Cite This Article:

Merline.G Identification and Treatment of Waste Water Using Ph Monitoring in Internet of Things Environment International Journal of Scientific Research, Vol : 4, Issue : 12 December 2015

Number of Downloads : 761

References :