Volume : VIII, Issue : IV, April - 2019
OPTIMIZATION OF PRODUCTION LINE WITH USING THE PLANT SIMULATION MODULE
Prof. Ing. Peter Trebuna, Ing. Jozef Trojan, Ing. Miriam Pekarcikova
Abstract :
This work is focused on the analysis of the production line for the so – soft shafts using the Plant Simulation module. Outputs from the software provide the information us, which it needed for suggestions for improvements in production. Subsequently, the benefits of each proposal will be appreciated and the best alternative will be selected.
Article:
Download PDF
DOI : https://www.doi.org/10.36106/paripex
Cite This Article:
OPTIMIZATION OF PRODUCTION LINE WITH USING THE PLANT SIMULATION MODULE, Prof. Ing. Peter Trebuna, Ing. Jozef Trojan, Ing. Miriam Pekarcikova PARIPEX‾INDIAN JOURNAL OF RESEARCH : Volume-8 | Issue-4 | April-2019
Number of Downloads : 147
References :
OPTIMIZATION OF PRODUCTION LINE WITH USING THE PLANT SIMULATION MODULE, Prof. Ing. Peter Trebuna, Ing. Jozef Trojan, Ing. Miriam Pekarcikova PARIPEX‾INDIAN JOURNAL OF RESEARCH : Volume-8 | Issue-4 | April-2019