Volume : V, Issue : IV, April - 2016

COMPARATIVE STUDY AND PROGRAMMING OF VARIOUS TYPES OF SLABS

Dr. D. R. Panchal

Abstract :

 The design of structures for commercial and industrial buildings is mainly concerned with the provision and support of load–beå horizontal surfaces. These floors or decks are usually made of reinforced concrete as it satisfies the criteria of low cost, high strength, and resistance to corrosion, aasion, and fire. In composite slab consist of profiled steel decking with an in–situ reinforced concrete topping. The composite interaction is achieved by the attachment of shear connectors to the top flange of the beam. Further post tensioned slabs are widely used in field for large spans and heavy loads subjected to it. Here, our aim is to study development of program of the design the Reinforced cement concrete slab, Composite slab & Post tensioned slab along with its parametric study. Programming is carried out using powerful MS Excel for design of slabs. Estimation of material quantity and cost are also studied here. The results tabulated from the program reveal that, the composite slab with profiled deck sheet provides better results than the post tensioned slab and reinforced concrete slab for one way simply supported and continuous slabs. Also the post tensioned slab provides better results than the composite slab with profiled deck sheet and reinforced concrete slab for two way simply supported and restrained slabs.

Keywords :

Article: Download PDF   DOI : 10.36106/ijsr  

Cite This Article:

Dr. D. R. Panchal COMPARATIVE STUDY AND PROGRAMMING OF VARIOUS TYPES OF SLABS International Journal of Scientific Research, Vol : 5, Issue : 4 APRIL 2016

Number of Downloads : 618

References :