Design & Fabrication of Compound Tool

J.Vinoth Kumar; T.Suresh; N.Jagatheesh; B.Rajasekaran; Syed Abuthahir; A.Sivasubramanian

Volume : III, Issue : XI, November - 2014

Design & Fabrication of Compound Tool

J. Vinoth Kumar, T. Suresh, N. Jagatheesh, B. Rajasekaran, Syed Abuthahir, A. Sivasubramanian

Abstract :

While converting a raw material into a finished product the product should be accurate .So to require the accurate product the design should be accurate .If the design is not accurate then defects will occur in manufactured product. Small mistakes in designing will make the product useless. So while designing the product only we should be very care full. By the implementation of the computers in design field, designing process became easier and the time also has been reduced. The basic fundamental reason for implementing the computer aided design is to increase the productivity, get more accuracy and also for sub dividing the parts which we required. There by reducing the time for synthesizing, analyzing and documentation purposes. In our project we used Catia for designing a Compound Die. The product which we designed is washer of M10 bolt generally the progressive tools are called as stage tool. We have done the two stage progressive tool which means the final component will come at second stage. The first stage is the piercing and the second stage is blanking