Volume : IV, Issue : IV, April - 2015

Design And Fabrication of Rolling System For Flat Bar Rolling

Dilip Kumar, Ashish Ligam

Abstract :

Flat bars are commonly used for various purposes in manufacturing industry. This system is designed as an alternative arrangement for coaming of flat bars. Coaming is widely used term in shipbuilding. It is derived from aerospace where coaming is used to ensure the air tight condition of doors; similarly in ships it prevents the entry of water. Manholes and lightning holes are the specific areas where the coamed flat bars are used. Even though coaming can be done on folding machines and pressing

machines, this small system serves the purpose at a smaller scale with better surface finish. The system designed has an alternate option of
manual operation in case of power cut shutdown. Hence in the absence of power cut down or power shortage flat bars can be easily coamed
on this system.

Keywords :

Article: Download PDF   DOI : 10.36106/ijsr  

Cite This Article:

Dilip Kumar, Ashish Ligam Design And Fabrication of Rolling System For Flat Bar Rolling International Journal of Scientific Research, Vol : 4, Issue : 4 April 2015


Number of Downloads : 1189


References :