Volume : IV, Issue : VIII, August - 2015

Design and Performance Analysis of an ElectroRheologicalDamper

Meshaalsuliman, Prof. S. R. Pawar

Abstract :

This paperis presenting the design, faication and performance analysis of an Electro–Rheological (ER) damper prototype, The characteristics of the used electrorheological (ER) fluid are experimentally obtained.The ER material is the one of which any of the rheological properties is depending upon the Electric–Field as in (volts/meter), this means, a material with a viscosity or shear stress which depends on the Electric–Field. A twin tube cylindrical ER damper type is designed and faicated, then its damping force is evaluated experimentally, which the design method of the ER damper is based on thedamping system requirements, such as,the controllable damping force. Which is obtained through load cell and a motor. By applying different voltages ( from 1KV to 3 KV), damping coefficient at each voltage value is obtained from the load setup.

Keywords :

Article: Download PDF   DOI : 10.36106/ijsr  

Cite This Article:

MeshaalSuliman, Prof. S.R.Pawar Design and Performance Analysis of an Electro Rheological Damper International Journal of Scientific Research, Vol : 4, Issue : 8 August 2015

Number of Downloads : 824

References :