Designing Handheld Programmer for  Controlling the Parameteres on Two Channel  Data Generator

Jyothsna.Undrakonda; Prof.Yenamandra.Gopala Rao

Volume : I, Issue : VII, December - 2012

Designing Handheld Programmer for Controlling the Parameteres on Two Channel Data Generator

Jyothsna. Undrakonda, Prof. Yenamandra. Gopala Rao

Abstract :

A hand held programmer for a two channel data generator development is the main goal of this paper. The controlling of the parameters of the two channel data generator can be done by using the handheld programmer. Texas Instruments MSP 430 series Mixed Signal Microcontroller, RF system (transceiver unit) and a Pulse Generator with amplifying and switching units (Electronic Device) be contained in Handheld unit. Through chip antenna the signal transmission is done in between the handheld and pulse generator. The handheld device is programmed to depicted pulse characteristics of a pulse generator that can be controlled by pressing the dedicated keys on the hand held device. Command from the microcontroller through RF system (transceiver unit) via Chip antenna reaches the pulse generator when we press keys on the hand held device as it is completely a dedicated handheld device for the particular Pulse generator. According to the Key pressed on the handheld device, the command alternates the pulse Characteristics. Embedded �C� program is the programming language that is used in development of handheld unit for two channel data generator.