Volume : III, Issue : VIII, August - 2014

FABRICATION OF EFFICIENCY INCREASER BY USING PREHEATING METHOD

A. Malaisamy, P. Balashanmugam

Abstract :

An attempt has been made in this research work to use preheating of exhaust gas is giving to input of ignition in Two/Four Stroke engine to increase the efficiency. Our foremost aim of selecting this research is to use efficiency increasing. It is also good with regard to economic considerations and engine efficiency. A method and system for preheating internal combustion engine fuel to an optimum temperature before introducing the fuel into the carburetion system. The two wheeler engine is an internal combustion engine. It is a device, which converts the thermal heat energy from the exhaust and converts it to air preheat. Also the atmospheric air is fixed over the silencer for intake the hot air to the carburetor. The concept of increasing the fuel efficiency of a petrol engine in this research is to pre-heat the intake air which is flowing through the carburetor. The humidity in the atmospheric air affects the petrol vaporization in the carburetor . Therefore, by pre-heating the inlet air to the carburetor for a considerable amount, the vaporization can be easier and in turn complete combustion is achieved

Keywords :

Article: Download PDF   DOI : 10.36106/ijsr  

Cite This Article:

A.Malaisamy, P.Balashanmugam FABRICATION OF EFFICIENCY INCREASER BY USING PREHEATING METHOD International Journal of Scientific Research, Vol : 3, Issue : 8 August 2014

Number of Downloads : 4192

References :