Volume : III, Issue : XI, November - 2014

Fabrication of zig zag Bending Machine

Aravinth. A, Arun Kumar. B, Anil Pokhrel, Jayakumar. G, Mr. A. Velmurugan, A. Pandiyan

Abstract :

The hydraulic jack has to give the manual pressure the horizontal bar move towards the work piece the work peace which bend towards the zig zag position the final work has obtained .The zig zag position is used to heat transfer take place and it is also used in different types of grill works. Copper is one of the heat transfer material the refrigerant flows inside the tube the large amount of heat transfer take place due to the zig zag position gradually heat will be reduced. Mild steel work piece is one of the zig zag stylish work has to be obtained by the machine more force than that of the conventional one. No maintenance is required since it’s an easy mechanism, reduced man power

Keywords :

Article: Download PDF   DOI : 10.36106/ijsr  

Cite This Article:

Aravinth.a,Arun kumar.b,Anil Pokhrel, Jayakumar.G,Mr.A.Velmurugan,A.Pandiyan Fabrication of zig zag Bending Machine International Journal of Scientific Research, Vol : 3, Issue : 11 November 2014

Number of Downloads : 2211

References :