Volume : III, Issue : XI, November - 2014
Fabrication of Zig Zag Pneumatic Lift
Bharath Kumar K. , Bibin George Thomas, Deepak Kumar R, Gowtham S. , Kiron Antony Rebeiro, Paul James Thadhani
Abstract :
This project is developed for the users to lift any weight using air pressure. High pressure air is stored in a tank. A cylinder with piston arrangement is connected with a zig–zag pattern. Two pipes connected with ball valves connect the air tank with the cylinder. When one valve is opened, the air rushes out into the cylinder. Therefore the piston moves in one direction. The rod connected with the piston pushes the zig–zag frame so that the lift moves up. When the other ball valve is opened, the air inside the cylinder is released. Therefore the lift comes down.
Keywords :
Article:
Download PDF
DOI : 10.36106/ijsr
Cite This Article:
Bharath Kumar K., Bibin George Thomas, Deepak Kumar R, Gowtham S.,Kiron Antony Rebeiro, Paul James Thadhani Fabrication of Zig Zag Pneumatic Lift International Journal of Scientific Research, Vol : 3, Issue : 11 November 2014
Number of Downloads : 2413
References :
Bharath Kumar K., Bibin George Thomas, Deepak Kumar R, Gowtham S.,Kiron Antony Rebeiro, Paul James Thadhani Fabrication of Zig Zag Pneumatic Lift International Journal of Scientific Research, Vol : 3, Issue : 11 November 2014
Our Other Journals...
-
Indian Journal of
Applied Research Visit Website -
PARIPEX Indian Journal
of Research Visit Website -
Global Journal for
Research Analysis Visit Website