Volume : IV, Issue : I, January - 2015

FPGA Based Implementation of 16 bit RISC Microcontroller

Nilam Patel, Prof. J. H. Patil

Abstract :

This project describes the design and implementation of some of the internal hardware components of a microcontroller. The subsystems designed are the fundamental hardware components necessary to create the 16-bit timer’s input capture and output compare modes, the index register, and other systems. The subsystems designed were the clock controller, the 16-bit timer, the register controller, the register, and the comparator. The project engineers implemented their system using Xilinx to test their logic and VLSI to construct the gates. VHDL code was written in order to implement the project onto an FPGA board.

Keywords :

Article: Download PDF   DOI : 10.36106/ijsr  

Cite This Article:

Nilam Patel, Prof. J.H.Patil FPGA Based Implementation of 16 bit RISC Microcontroller International Journal of Scientific Research, Vol : 4, Issue : 1 January 2015

Number of Downloads : 1323

References :