Volume : III, Issue : VIII, August - 2014
Low Power Implementation and Analysis of Digital Fir Filter Based Low Power Multiplexer Base Shift/Add Multiplier
D. Hari Priya
Abstract :
Conventional FIR filters consist of cells equal in number to the length of the filter i.e. the number of data taps. Each cell consists of a storage register, a second register and a multiplier. The storage register stores the data tap values, which are digital samples of the signal being processed by the filter. The second register stores the filter coefficients for a particular tap and the multiplier generates the product of the two register contents. The latter product serves as the output of the cell, and the weighted sum that constitutes the FIR filter output is generated by adding the outputs of all of the cells. FIR filters are said to be finite because they do not have any feedback. FIR digital filters are widely used in DSP by the virtue of its stability, linear phase, fewer finite precision error and efficient implementation.
Keywords :
Article:
Download PDF
DOI : 10.36106/ijsr
Cite This Article:
D.Hari Priya Low Power Implementation and Analysis of Digital Fir Filter Based Low Power Multiplexer Base Shift/Add Multiplier International Journal of Scientific Research, Vol : 3, Issue : 8 August 2014
Number of Downloads : 545
D.Hari Priya Low Power Implementation and Analysis of Digital Fir Filter Based Low Power Multiplexer Base Shift/Add Multiplier International Journal of Scientific Research, Vol : 3, Issue : 8 August 2014
Our Other Journals...
-
Indian Journal of
Applied Research Visit Website -
PARIPEX Indian Journal
of Research Visit Website -
Global Journal for
Research Analysis Visit Website