Volume : IV, Issue : VIII, August - 2015
Temperature, Velocity & Pressure Distribution Analysis of a Cooling System in a Cold Storage using CFD
Md. Faraz Khan, Priynaka Jhavar, Sachin Gajbhiye
Abstract :
The research objective was to determine temperature, pressure and velocity distributions for one of the cooling system arrangement commonly used in cold stores. In this cooling system the evaporator coil is located at the top of one of the wall of cold storage. Computational fluid dynamics was used for modelling of distribution of temperature, pressure and velocity inside the cold storage. Storage temperature was assumed to be –20C. Boundary conditions were set as; Inlet–Surface of fluid inlet, Outlet–Surface of fluid outlet. A tetrahedral mesh was created by using ANSYS 14.5 and calculation finished when accessing a solution. Turbulence was modelled using the k– ? (k–epsilon). Spatial distribution in the cold storage for the cooling system was modelled and evaluated in this research. The results obtained from CFD explain more clearly the understanding of cooling
Keywords :
Article:
Download PDF
DOI : 10.36106/ijsr
Cite This Article:
Md. Faraz Khan, Priynaka Jhavar, Sachin Gajbhiye Temperature, Velocity & Pressure Distribution Analysis of A Cooling System in a Cold Storage Using Cfd International Journal of Scientific Research, Vol : 4, Issue : 8 August 2015
Number of Downloads : 965
References :
Md. Faraz Khan, Priynaka Jhavar, Sachin Gajbhiye Temperature, Velocity & Pressure Distribution Analysis of A Cooling System in a Cold Storage Using Cfd International Journal of Scientific Research, Vol : 4, Issue : 8 August 2015
Our Other Journals...
-
Indian Journal of
Applied Research Visit Website -
PARIPEX Indian Journal
of Research Visit Website -
Global Journal for
Research Analysis Visit Website