Volume : IV, Issue : III, March - 2014
Assessment of Physico–Chemical Water Parameters Using Correlation Analysis: A Case Study of Gangapur Dam at Nashik District (M.s.) India
Bharati Kolhe, S. P. Zambare, S. B. Andhale
Abstract :
Present investigation report shows physico–chemical parameters of water samples collected from Gangapur Dam of Dist. Nashik observed during the years 2009–2010 and 2010–2011. Water samples collected were analyzed for pH, electric conductivity (EC), dissolved oxygen (DO), temperature, total dissolved solids (TDS), suspended solids (SS), biological oxygen demand (BOD). Average values for, pH = 7.93 to 8.00, EC = 215.04 to 292.67 μS/cm, DO = 6.23 to 6.71 mg/L, Temperature = 27.25 to 24.82 0C, TDS = 130.21 to 170.75 mg/L, SS = 25.50 mg/L, BOD = 8.04 to 8.00 mg/L during the years 2009–2010 and 2010–2011 respectively. All parameters studied were found to be within normal limits, and the water was found to be suitable for irrigation as well as different purpose.
Keywords :
Article:
Download PDF
DOI : 10.36106/ijar
Cite This Article:
Bharati Kolhe, S. P. Zambare, S. B. Andhale Assessment of Physico-Chemical Water Parameters Using Correlation Analysis: A Case Study of Gangapur Dam at Nashik District (M.s.) India Indian Journal of Applied Research, Vol.IV, Issue. III
Number of Downloads : 977
Bharati Kolhe, S. P. Zambare, S. B. Andhale Assessment of Physico-Chemical Water Parameters Using Correlation Analysis: A Case Study of Gangapur Dam at Nashik District (M.s.) India Indian Journal of Applied Research, Vol.IV, Issue. III
Our Other Journals...
-
International Journal of
Scientific Research Visit Website -
PARIPEX Indian Journal
of Research Visit Website -
Global Journal for
Research Analysis Visit Website