Volume : III, Issue : VII, July - 2014
Centralized Control Room Design Using Loop Controller and Supervisory Control & Data Acquisition System (Scada): A Case Study
Rakesh B. Patel
Abstract :
This paper describes the application of process control using single loop controller and SCADA (Supervisory Control and Data Acquisition System). Now a day all middle class companies are using numbers of single loopcontroller for process control. All single loop controllers can be connected with computer using SCADA for plant visualization and all trends record for whole plant. Total system of plant visualization and easy computer controller can be generated with very small investment.
Keywords :
Article:
Download PDF
DOI : 10.36106/ijar
Cite This Article:
Rakesh B. Patel Centralized Control Room Design Using Loop
Controller and Supervisory Control & Data Acquisition System (Scada): A Case Study Indian Journal of Applied Research, Vol.4, Issue.7 July 2014
Number of Downloads : 631
Rakesh B. Patel Centralized Control Room Design Using Loop Controller and Supervisory Control & Data Acquisition System (Scada): A Case Study Indian Journal of Applied Research, Vol.4, Issue.7 July 2014
Our Other Journals...
-
International Journal of
Scientific Research Visit Website -
PARIPEX Indian Journal
of Research Visit Website -
Global Journal for
Research Analysis Visit Website