Volume : III, Issue : VII, July - 2013

Design & Analysis of Frame of 63 Ton Power Press Machine by Using Finite Element Method

H. N. Chauhan, M. P. Bambhania

Abstract :

Metal forming is one of the manufacturing processes which are almost chip less. These operations are mainly carried out by the help of presses and press tools. These operations include deformation of metal work pieces to the desired size and size by applying pressure or force Press machine always working under impact load condition. Because of continuous impact load, frame of press machine always experience continuous tensile stress. Press machine continuous deals with stress and because of that frequently structural failure problem occurred in machine. Instead of sharp corner in C–plate fillet is provided, then it is useful to reduce failure in structure. Amount of fillet is depends on load condition experienced by frame and that can be analyzed by using FEM Tool. It is also helpful to reduce thickness of plate of frame structure so that material saving and cost benefit will be considerable

Keywords :

Article: Download PDF   DOI : 10.36106/ijar  

Cite This Article:

H.N.Chauhan, M.P.Bambhania Design & Analysis of Frame of 63 Ton Power Press Machine by Using Finite Element Method Indian Journal of Applied Research, Vol.III, Issue.VII July 2013

Number of Downloads : 815

References :