Volume : VII, Issue : III, March - 2017

EXPERIMENTAL INVESTIGATION OF CHATTER IN HARD TURNING MACHINING WITH VIBRATION ANALYSIS

Patel Niravkumar R, Dr. D. H. Pandya

Abstract :

 Chatter is a topic of immense engineering importance because its occurrence in machining results in poor surface finish promotes tool wear and hampers productivity. In this paper, chatter is reducing by change damping value of tool holder by changing shim material. Finite element method is use for find damping ratio of different shim material. Model analysis is done by ANSYS. Experiment work is done on CNC turning 45 HRC mild steel work material for collect acceleration data and compares the accelerations value for different shim material. Find out the best shim material for turning operation.

Keywords :

Article: Download PDF   DOI : 10.36106/ijar  

Cite This Article:

Patel Niravkumar R, Dr. D.H.Pandya, EXPERIMENTAL INVESTIGATION OF CHATTER IN HARD TURNING MACHINING WITH VIBRATION ANALYSIS, INDIAN JOURNAL OF APPLIED RESEARCH : Volume‾7 | Issue‾3 | March‾2017

Number of Downloads : 448

References :