Volume : I, Issue : XII, September - 2012

Implementation On Three Phase Voltage Source Inverter With 1500 Conduction Mode

Mr. Divyeshkumar G. Mangroliya, Mr. Girish V. Jadhav

Abstract :

This paper presents a new modification and implementation for the most common, simple and well–known three–phase six insulated gate bipolar transistors (IGBTs) switch voltage source inverter (VSI). Via this strategy, each one of the six IGBTs conducts for 150o instead of the known 180o or 120o conduction modes and this 1500 conduction was get through using a PIC16F72 Microcontroller, resulting in a wye connected load, the output phase voltage becomes a seven–level, 12 steps waveform. So the using the new controlling strategy, this result a 50% reduction of the total harmonic distortion is obtained and simplicity of hardware compare to 1800 and 1200 conduction modes. Simulation and experimental results show the contribution of the proposed strategy. Simulation is done Mat–Lab and proutius simulator.

Keywords :

Article: Download PDF   DOI : 10.36106/ijar  

Cite This Article:

Mr. Divyeshkumar G. Mangroliya, Mr.Girish V. Jadhav Implementation On Three Phase Voltage Source Inverter With 1500 Conduction Mode Indian Journal of Applied Research, Vol.I, Issue.XII September 2012

Number of Downloads : 695

References :